Decode in progress — confirm all tabs to finish.0 / 0 colour tabs
·
0 / 0 production tabs confirmed
Composite view—
LAYER OPACITY
Preview only — these sliders do not change the yarn figures.
The base layer is shown solid and the upper layers over it. Adjust the sliders on the right to preview a different blend. Click any layer button in the strip to return to per-layer editing.
Scroll to pan • Space+drag • Middle-click drag
COMPARISON
DESIGN INTENT
100%
PROJECT INFO
ftin
ftin
WASTAGE SIZE
ftin
ftin
NOTES
SAMPLE
Define a sample region to export a cropped subset.
cm
cm
ftin
ftin
CONSTRUCTION & TUFTS
×
Pixels: —
Size: —
DESIGN SETTINGS
Loading…▼
0%
0%
COLOURS & PRODUCTION 0
COLOUR TABS 0
PRODUCTION TABS 0
COLOUR TABS 0
PRODUCTION TABS 0
COLOUR TABS 0
Mask colour
0 tabs selected
PRODUCTION TABS 0
Trace:
0 tabs selected
Ready — Upload an image to beginC|Hand Tufted|12×12 px/in|— × —|— × —|——|100%
Size in tufts[ ]
Cut ⌘X
Copy ⌘C
Paste ⌘V
Clear Delete
Move and clear ⌘ drag
Mirror Selection Horizontally H
Mirror Selection Vertically F
Rotate Selection 90° ⌘⇧R
Fill empties with…
Choose the yarn those cells should be woven in. One undo step.
Replace Colour
Swap every pixel of one colour tab for another. Works on the whole design, or only inside the current rectangle selection.
Pick two colours above to see how many pixels will change.
Insert / Remove Rows or Columns
Adds or takes away rows or columns of tufts. With the tool active the pointer shows the line: click to act there, drag to say how many, and hold CTRL to swap rows and columns. Type a number below instead if you know the exact line.
Contour — Grow / Shrink Colour
Makes the colour you are drawing with fatter or thinner by a number of tufts. Growing takes the tufts from whatever is beside it; shrinking gives its tufts to the colour that borders them most — never to empty graph paper. A protected colour is neither eaten nor shrunk.
tufts
Graphic Repeat
Lays the selected motif out across the carpet. The blue boxes on the canvas show where the copies will land — orange ones are mirrored. Nothing is written until you press Apply, and one Apply is one Undo. A protected colour is left alone, and a copy that runs off the edge is cut off rather than dropped.
×across × down
×across × down
Shuffle
Moves each tuft a random step along the row (or down the column), so a hard edge breaks up into a woven one. It works on the selection if there is one and on the whole design if there is not. A protected colour is left where it is, graph paper stays graph paper, and one Apply is one Undo.
tufts
0%
Reduce colours
How the picture is turned into a set of yarn colours. A carpet design is usually FLAT artwork — a few dozen exact fills — and not a photograph, so the two are not the same job.
The picture comes in as the yarns you already stock. Every colour is matched to the nearest yarn in the boxes you tick — nearest by eye, not by arithmetic on the numbers — so the design is ready to weave instead of ready to match by hand.
POM boxes
colours
Change All Colour
Moves the colours of the design together. The canvas follows as you drag; nothing is written until you press Apply. The yarn each colour tab names — its code, its POM box, its material — does not change: this changes how the design is drawn, not what it is woven from. A protected colour is left alone.
0°
0%
0%
New Project
Opens an empty design at this size — a sheet of graph paper to draw on. Every cell starts empty; paint them, or drag an image onto the canvas, before you generate.
×cm
×H×V
Canvas Size
Adds graph paper around the design, or takes cells off it — type a minus number to take cells away, for example -20 at the bottom. (A plain hyphen, the one on the keyboard.) The artwork keeps its place; any new area is empty, ready to draw on. The carpet size follows.
×
Inherit From Another File
No file chosen
Copy project metadata (name, code, customer, notes, quality, material, etc.). Dimensions,
PPI and per-layout positions are excluded so the carpet shape is never overwritten.
CopyFieldCurrent → New
For a file that came back from external editing: match its colours against the reference
and rebuild production tabs (mix, ply, material, label, code). Exact-colour matches inherit
silently; close matches are listed below for your review.
Close matches — please review
Select Colour
Tip: select multiple colours to add them all as separate colour tabs.
Hover a colour to preview
Selected
Click colours to select
0 selected
Build Abrush Hank
Sum: 100%
+ Custom Colour
#808080
RGB
HSV
Library
Yarn Working
Generate Output Files
Client files go to customers. Factory files are for weavers.
Client Files
Factory Files
Shade Cards
Sample Codes (one per line):
Assistant
I can help modify this design. Type "help" for all commands. Examples:
remove tab 6
change tab 3 to deep red
merge tab 4 and 5
set complexity to level 1
set size to 300x400
Add Colour to Mix
Select colours to add. New colours from the palette will also be added as colour tabs automatically.
Unsaved Changes
You have unsaved changes in this project. What would you like to do?
Import Design Settings
File
File pixels:
— × — pixels
Production grid:
—(fitted to the carpet size)
Which value should drive the calculation?
PPI
Horizontal:
px/inch
Vertical:
px/inch
⚠ Non-standard PPI
Size
Width:
cmftin
Length:
cmftin
Processing…
Import Production File
Decode Production File
Drop a single composite production file (design + legend together) and the server will extract the colour tabs, production zones, and project metadata for you.
Production zones come from the production BMP exactly as in Import Production File. The legend image (PNG/JPG/BMP — the whole sheet is fine) supplies the colour swatches and their printed codes, recipes and size. The actual view is then filled in for you.
⚠
Imported automatically — please verify before exporting